|
Post by di$TOrTed on Jun 10, 2009 22:10:32 GMT -5
This is the general maintenance for the SLG. I suggest doing this after every time you play. First, you need an SLG. Take your allen wrench and unscrew the backcap. Put your finger in the breach and pop the bolt out the back. You now have all the pieces out. Wipe them off and lightly grease the o-rings. No need to glob it on them, just get a nice glaze on and around them.Put the bolt back into the marker and screw the backcap back on and you are good to go. NOTE: There is absolutely no need to unscrew the two halves of the bolt. This is only if you are replacing your sear-ring.
|
|