Post by di$TOrTed on Jun 12, 2009 11:50:18 GMT -5
This is how to disassemble your SLG.
First, you need an SLG.
Remove the barrel.
Remove the macroline and unscrew the regulator.
Remove the backcap and bolt. Unscrew the cap and use your finger to push the bolt out from the front.
Undo the screw on the left side of the grip and remove the battery. This isn't really necessary due to the SLGs design but I do it anyway out of habit.
Unscrew the small screw inside the eye covers and remove the detents. Also pull the eyes out of their sockets, they should come out with relative ease.
Unscrew the two screws that attach the grip frame to the body of the marker and pull the frame away making sure the eyes don't get caught on anything.
There is a small pin holding the sear on the body, it can easily be pushed out. Make sure not to lose the small sear spring.
Reassembly is opposite of disassembly.
ASA adjustment:
To tighten the ASA onto the built-in rail, you tighten this screw
It is the smaller, dark hole under where the battery sits. The big one to the left is what holds the rail onto the marker. Tighten/loosen the smaller screw to tighten/loosen your ASA on your SLG.
First, you need an SLG.
Remove the barrel.
Remove the macroline and unscrew the regulator.
Remove the backcap and bolt. Unscrew the cap and use your finger to push the bolt out from the front.
Undo the screw on the left side of the grip and remove the battery. This isn't really necessary due to the SLGs design but I do it anyway out of habit.
Unscrew the small screw inside the eye covers and remove the detents. Also pull the eyes out of their sockets, they should come out with relative ease.
Unscrew the two screws that attach the grip frame to the body of the marker and pull the frame away making sure the eyes don't get caught on anything.
There is a small pin holding the sear on the body, it can easily be pushed out. Make sure not to lose the small sear spring.
Reassembly is opposite of disassembly.
ASA adjustment:
To tighten the ASA onto the built-in rail, you tighten this screw
It is the smaller, dark hole under where the battery sits. The big one to the left is what holds the rail onto the marker. Tighten/loosen the smaller screw to tighten/loosen your ASA on your SLG.