|
Post by andrewt1001 on Jun 29, 2009 22:41:14 GMT -5
*By preforming this modification on your paintball gun means that NDS takes no responsibility in NO way for your actions. NDS takes NO responsibility for damaged property, bodily harm, etc. Use this modification at your own risk.* To mill your tippmann 98 body means to take the "tippmann" badge off of the body of your gun. This gives your gun a much smoother look and seems more appealing to most people. You will need... A file Sanding tool sand paper (various grits) paint To start out you WILL need to paint your gun in the end or just live with an ugly exposed piece of metal. first: start filing down the tippmann logo (or sanding tool ex. www.drillspot.com/products/39969/Dayton_4CA33_High_Speed_Air_Sander (not one exactly like this but similar) once the letter edges are flat on the surface ( I used this as a guide or reference to make sure I wouldn't grind too deep) start using sand paper. you should use the grits of sandpaper in the following order to grind down the middle between the letters, 120, 180, 240, 360, When done using your highest grit it should look like a dull shine. paint over your gun using this guide: ndspb.proboards.com/index.cgi?board=tech&action=display&thread=10I did this and it looks great when I took my time.
|
|